Tulsa, OK
Hardwood Floor Moisture Testing in Tulsa, OK
You can't see how wet a hardwood floor is. The top can feel dry while the bottom of the boards and the subfloor are still soaked. Moisture testing tells you where the water is, how much is there, and whether the floor can be saved. Every decision we make starts here.
What Moisture Readings Tell You
Where the water is: the true edge of the wet area, often bigger than what you see.
How wet it is: compared with dry boards in your own home.
Whether boards can be dried in place or need to come out.
When drying is finished: not a guess, a match with dry readings.
Pin vs Pinless Meters
| Pin meter | Pinless meter | |
|---|---|---|
| How it works | Two small pins measure inside the wood | Scans below the surface without marks |
| Best for | Exact readings at specific depths | Fast scanning of large areas |
| Marks on the floor | Tiny pin holes | None |
Both have a place: pinless to scan and map, pins to confirm.
Mapping the Wet Area Room by Room
We start at the source and work outward, taking readings across the floor, along walls and through doorways. The result is a map of wet and dry zones. Leaks from a washer or AC closet often reach further than the visible damage, and the map shows exactly how far.
Why We Compare With Dry Boards in Your Home
Every house, wood species and season is different, so there's no single number that means "dry" for every floor. We take readings from unaffected boards in your home and use them as the target. The floor is dry when the wet area matches them.
Testing the Subfloor Too
A dry board on a wet subfloor won't stay dry. We test the subfloor wherever we can reach it: through gaps, vents, crawlspaces or removed boards.
Readings and Photos for Your Records
We note readings and take photos as we go, so you can see how drying is progressing. Many homeowners keep these with their home records or insurance file.
Moisture Testing FAQs
What reading means my floor is too wet?
There isn't one number for every floor. We compare your wet boards with dry boards in the same house.
Do pin meters damage the floor?
They leave tiny holes. Pinless meters handle most scanning, and pins are used only where exact readings matter.
Why test the subfloor too?
Because a wet subfloor will push moisture back into the boards, even after they look dry.
Can I test my floor myself?
A basic meter can give you a rough idea, but mapping the full wet area and the subfloor takes experience and the right tools.
Related Hardwood Services
Also serving Broken Arrow, Owasso, Jenks, Bixby and more areas.
Not Sure How Wet Your Floor Is? Call Now
A moisture map is the first step to an honest answer.
ZIP Codes We Serve in Tulsa, OK
We provide hardwood floor moisture testing in every one of these Tulsa ZIP codes:
Also serving Broken Arrow, Owasso, Jenks, Bixby, Sand Springs, Sapulpa, Glenpool, Claremore and Coweta.